Czyszczenie zbiorników is one of the most essential yet challenging maintenance operations in industrial environments. When storage tanks accumulate sludge, hydrocarbon residues, or chemical deposits, choosing the right tank cleaning agent and method becomes critical to ensure safety, efficiency, and protection of the tank’s internal coating. AQUAQUICK 2000 stands out as a trusted tank cleaning solution—especially when paired with high pressure jet systems.
Why Use High Pressure Jetting for Tank Cleaning?
High pressure jetting is a widely adopted method for tank cleaning, particularly effective when dealing with heavy sludge or stubborn hydrocarbon residues. It uses water pressure (commonly up to 3500 PSI) to dislodge and remove the contaminants from the tank walls and base.
When combined with AQUAQUICK 2000, the results are far superior compared to traditional methods. AQUAQUICK 2000 actively breaks down hydrocarbons and sludge, converting them into easily flushable matter. This reduces labor intensity and speeds up the desludging process.
Key advantages of using high pressure jet cleaning with AQUAQUICK 2000:
- No damage to tank coatings, metal walls, or internal plates
- Fast penetration and breakdown of thick sludge layers
- Enhanced rinsing results and odor neutralization
- Environmentally safe and user-friendly operation
Step-by-Step: Effective Tank Cleaning Procedure Using AQUAQUICK 2000
- Preparation of the Work Area:
- Ensure safety protocols and ventilation systems are in place.
- Position the high pressure jetting equipment with a 3500 PSI setting.
- Prepare an AQUAQUICK 2000 solution diluted between 1:15 and 1:25, depending on sludge thickness.
- Zastosowanie AQUAQUICK 2000:
- Spray the AQUAQUICK 2000 solution inside the tank using a tank sprinkler (Butterworth) or manual sprayers.
- Let it sit for 10–20 minutes to begin breaking down the sludge.
- High Pressure Jetting:
- Begin pressure washing from the top of the tank downward, systematically covering all surfaces.
- AQUAQUICK 2000 emulsifies the hydrocarbons and loosens stains, allowing easy removal.
- Rinsing and Final Inspection:
- Rinse the tank with hot water to accelerate the flushing process and eliminate residues.
- Inspect the tank to ensure no residual buildup remains.
- Optional Manual Touch-Up:
- If any stubborn residues persist, use a stiff brush or manual scraping with AQUAQUICK 2000 applied directly to the area.
Real Results from the Field
Watch how AQUAQUICK 2000 makes quick work of thick sludge in a live industrial setting:
🎥 AQUAQUICK 2000 Tank Cleaning with High Pressure Jet (YouTube)
This video showcases real-time cleaning inside a contaminated storage tank, where AQUAQUICK 2000, combined with a pressure jet system, achieves a spotless interior finish without harming the tank’s protective lining.
Important Tank Cleaning Tips
- Always use hot water if possible. Heat helps break sludge faster—similar to how warm milk softens a thick peanut butter shake.
- Never exceed the advised dilution ratio. A 1:50 mix can compromise cleaning power and leave residues.
- Ensure uniform application. Cover every inch of the tank’s interior, including hard-to-reach corners and beneath access ports.
- Use proper PPE and ventilation. Even though AQUAQUICK 2000 is non-toxic and coating-safe, good ventilation and protective gear are essential for confined spaces.
A Cost-Efficient and Sustainable Choice
One of the most compelling reasons to adopt AQUAQUICK 2000 for tank cleaning is its long-term cost efficiency. Unlike aggressive chemical cleaners that risk damaging internal coatings or require expensive disposal procedures, AQUAQUICK 2000 is biodegradable, non-toxic, and safe for wastewater systems. This not only reduces environmental impact but also cuts down on regulatory compliance costs and post-cleaning repairs. For companies focused on sustainable operations and budget-conscious maintenance, this tank cleaning agent delivers unmatched value without compromise.
Final Thoughts: AQUAQUICK 2000 as the Ideal Tank Cleaning Agent
In industrial tank cleaning, using the right solution is everything. AQUAQUICK 2000 offers a complete cleaning system that’s fast, effective, environmentally friendly, and safe for staff and surfaces. When high pressure jetting is used in conjunction, results are significantly improved, cutting down cleaning time and effort.
If you’re looking for a tank cleaning agent that handles sludge, residue, and contamination without affecting coatings or requiring harsh chemicals, AQUAQUICK 2000 is the total solution.
