When an oil or fuel spill occurs on the road, immediate action is essential. Whether it’s due to a traffic accident, a leaking truck, or a hydraulic system failure, the risk of secondary accidents increases every minute. Fortunately, AQUAQUICK 2000 provides a fast, safe, and environmentally friendly way to handle road spill cleanup with professional-grade results.
In this guide, you’ll learn exactly how to use AQUAQUICK 2000 for cleaning road spills effectively — using the correct dilution ratios, cleaning tools, and best practices for long-term results.
✅ Why Use AQUAQUICK 2000 for Road Spill Cleanup?
AQUAQUICK 2000 is a biodegradable, non-toxic degreaser and dispersant trusted by fire brigades across the Netherlands. It’s designed to remove oil, diesel, hydraulic fluids, and other hydrocarbons from road surfaces — without harming the environment or creating new hazards.
Top benefits:
- ✔️ Instantly removes the slippery effect from oil spills
- ✔️ Safe for asphalt, concrete, soil, and drainage systems
- ✔️ Biodegrades 100% within 21 days
- ✔️ Works with manual or pressure cleaning methods
- ✔️ Ideal for emergency spill response and road maintenance teams
🧪 Step-by-Step: How to Clean a Road Spill with AQUAQUICK 2000
Follow these simple steps to clean road spills thoroughly and safely:
1. Prepare the Cleaning Solution
Dilute AQUAQUICK 2000 with clean water in a ratio of 1:25 up to 1:50 depending on how severe the spill is.
- Light contamination → Use 1:50
- Heavy oil spill → Use 1:25 for stronger action
💡 Tip: Use warm or hot water to enhance cleaning performance.
2. Apply the Solution Generously
Spray the diluted AQUAQUICK 2000 mixture directly onto the spill area. Make sure the entire contaminated zone is covered.
3. Scrub the Surface Thoroughly
Use a stiff scrub brush or broom to agitate the surface and break up the oil film. This mechanical action helps lift oil particles from the asphalt or concrete pores.
4. Rinse the Area Clean
Naudokite high-pressure jet or hose to rinse away the lifted oil and cleaner.
- Water will carry the separated oil into the drainage system, where it can be safely removed by an oil/water separator.
- The road surface will be non-slippery immediately after treatment.
5. Handling Stubborn Stains
In cases where oil has soaked deep into hot asphalt, visible stains may remain temporarily.
☀️ Good to know: Sunlight and oxidation will naturally reduce these stains over time.
🧼 Results You Can Trust
After using AQUAQUICK 2000:
- Svetainė slippery hazard is gone instantly, reducing accident risk.
- Any runoff is safe for water treatment systems.
- The cleaner itself fully biodegrades within 21 days, leaving no harmful residue.
🔥 Trusted by Firefighters & First Responders
AQUAQUICK 2000 is the standard cleanup solution for fire brigades, police, municipalities, and road contractors across the Netherlands. Its fast action, reliability, and environmental safety make it the go-to choice for road spill emergencies.
📦 Where to Buy AQUAQUICK 2000
Ready to clean smarter and safer?
👉 Visit https://www.aquaquick2000.com to place your order
📩 For bulk or reseller inquiries: [email protected]
